<!-- language missing -->

Abrasive film rolls

Boost your efficiency

行业分支机构

磨料形式

过滤器
选项宽度长度孔型Perforation目数/细度颜色包装单位零件号

70mm10000mm9-hole67mm40light green1F 03E 008 NK9 / 8844.0927.0040

70mm10000mm9-hole67mm60light green1F 03E 008 NL1 / 8844.0927.0060

70mm10000mm9-hole67mm80light green1F 03E 008 NL2 / 8844.0927.0080

70mm12000mm15-hole67mm120light green1F 03E 008 NL5 / 9945.6786.0120

70mm12000mm15-hole67mm150light green1F 03E 008 NL6 / 9945.6786.0150

70mm12000mm15-hole67mm180light green1F 03E 008 NL7 / 9945.6786.0180

70mm12000mm15-hole67mm220light green1F 03E 008 NL8 / 9945.6786.0220

70mm12000mm15-hole67mm240light green1F 03E 008 NL9 / 9945.6786.0240

70mm12000mm15-hole67mm320light green1F 03E 008 NM1 / 9945.6786.0320

70mm12000mm15-hole67mm400light green1F 03E 008 NM2 / 9945.6786.0400


长度10000mm
宽度70mm
厚度67mm
目数/细度40
包装单位1
F 03E 008 NK9 / 8844.0927.0040

长度10000mm
宽度70mm
厚度67mm
目数/细度60
包装单位1
F 03E 008 NL1 / 8844.0927.0060

长度10000mm
宽度70mm
厚度67mm
目数/细度80
包装单位1
F 03E 008 NL2 / 8844.0927.0080

长度12000mm
宽度70mm
厚度67mm
目数/细度120
包装单位1
F 03E 008 NL5 / 9945.6786.0120

长度12000mm
宽度70mm
厚度67mm
目数/细度150
包装单位1
F 03E 008 NL6 / 9945.6786.0150

长度12000mm
宽度70mm
厚度67mm
目数/细度180
包装单位1
F 03E 008 NL7 / 9945.6786.0180

长度12000mm
宽度70mm
厚度67mm
目数/细度220
包装单位1
F 03E 008 NL8 / 9945.6786.0220

长度12000mm
宽度70mm
厚度67mm
目数/细度240
包装单位1
F 03E 008 NL9 / 9945.6786.0240

长度12000mm
宽度70mm
厚度67mm
目数/细度320
包装单位1
F 03E 008 NM1 / 9945.6786.0320

长度12000mm
宽度70mm
厚度67mm
目数/细度400
包装单位1
F 03E 008 NM2 / 9945.6786.0400

Boost your efficiency

Efficient stock removal and a very long lifetime in dry sanding applications. The paper thickness, which is tailored to the grit and application, performs impressively on bodyfiller, primer filler and varnish materials. 1550 siapower uses sustainable FSC paper for the abrasive backing.

技术

S Performance

  • Greater efficiency thanks to application-optimised process steps
  • Highest stock removal rate
  • Performance-enhancing grit mix with ceramic aluminium oxide in the 40–220 grit range
  • Minimal clogging characteristics for lacquer sanding grit range 400-600
  • Sustainable FSC paper for the abrasive backing
  • Sanding of coatings and impurities
  • Sanding out unevenness at the edges of repaired surfaces
  • Flatting of bodyfiller and composite materials
  • Fine sanding of primer filler
  • Keying of old and new lacquers
  • Producing a matt finish on old and new lacquers for blending
  • Colour
  • Primer filler
  • Bodyfiller
  • Lacquer
  • Old lacquer
  • Primer coat
  • Epoxy primer coat
  • Cathodic dip primer coat
  • Plastics
  • Acrylic glass
  • Gelcoat polyester
  • Glass-fibre reinforced plastic (GRP)
去除率
非常高
使用寿命
非常长
饰面
中等非常好
柔韧性
非常坚固高度灵活

砂粒类型:
Mixed grit with ceramic content - 40 – 220
Semi-friable aluminium oxide / blue-fired - 240 – 600
White aluminium oxide - 800

背基:
d-wt paper (FSC-certified) - 40 – 100
c-wt paper (FSC-certified) - 120 – 240
b-wt paper (FSC-certified) - 320 – 800

涂层:
Electrostatic

粘合:
Resin over resin

特殊涂料:
Stearate - 240 – 800