1550 siapower

siafast discs

Boost your efficiency

eFlyer_1550-siapower_Automotive_en
Technical data sheet
Film

Back to product search

Branches of Industry

Abrasive format

Filter
SelectionDiameterHole patternGrit/finenessColourPacking unitPart number
150mmwithout holes40light green50F 03E 008 KS8 / 8645.2205.0040
150mm57-hole40light green50F 03E 008 KT0 / 2880.1926.0040
150mm15-hole40light green50F 03E 008 KT2 / 8858.5970.0040
150mm49-hole40light green50F 03E 008 KT4 / 5150.9203.0040
125mmwithout holes40light green50F 03E 008 M99 / 8117.6481.0040
125mm41-hole40light green50F 03E 008 MB9 / 8471.5892.0040
Diameter150mm
Grit/fineness40
Packing unit50
F 03E 008 KS8 / 8645.2205.0040
Diameter150mm
Thickness10mm
Grit/fineness40
Packing unit50
F 03E 008 KT0 / 2880.1926.0040
Diameter150mm
Thickness18mm
Grit/fineness40
Packing unit50
F 03E 008 KT2 / 8858.5970.0040
Diameter150mm
Thickness10mm
Grit/fineness40
Packing unit50
F 03E 008 KT4 / 5150.9203.0040
Diameter125mm
Grit/fineness40
Packing unit50
F 03E 008 M99 / 8117.6481.0040
Diameter125mm
Thickness10mm
Grit/fineness40
Packing unit50
F 03E 008 MB9 / 8471.5892.0040
Selection in the basket

Boost your efficiency

Efficient stock removal and a very long lifetime in dry sanding applications. The paper thickness, which is tailored to the grit and application, performs impressively on bodyfiller, primer filler and varnish materials. 1550 siapower uses sustainable FSC paper for the abrasive backing.

Technology

S Performance

Advantages

  • Greater efficiency thanks to application-optimised process steps
  • Highest stock removal rate
  • Performance-enhancing grit mix with ceramic aluminium oxide in the 40–220 grit range
  • Minimal clogging characteristics for lacquer sanding grit range 400-600
  • Sustainable FSC paper for the abrasive backing

Applications

  • Sanding of coatings and impurities
  • Sanding out unevenness at the edges of repaired surfaces
  • Flatting of bodyfiller and composite materials
  • Fine sanding of primer filler
  • Keying of old and new lacquers
  • Producing a matt finish on old and new lacquers for blending

Application

  • Colour
  • Primer filler
  • Bodyfiller
  • Lacquer
  • Old lacquer
  • Primer coat
  • Epoxy primer coat
  • Cathodic dip primer coat
  • Plastics
  • Acrylic glass
  • Gelcoat polyester
  • Glass-fibre reinforced plastic (GRP)

Use

Properties

Removal rate
lowvery high
Lifetime
shortvery long
Finishing
mediumvery good
Flexibility
very rigidhighly flexible

Profile

Grit type:
Mixed grit with ceramic content - 40 – 220
Semi-friable aluminium oxide / blue-fired - 240 – 600
White aluminium oxide - 800

Backing:
d-wt paper (FSC-certified) - 40 – 100
c-wt paper (FSC-certified) - 120 – 240
b-wt paper (FSC-certified) - 320 – 800

Coating:
Electrostatic

Bonding:
Resin over resin

Special coating:
Stearate - 240 – 800