sia House – uncomplicated, simple and quick
12 Entrance doors with a perfect surface finish
1
Sanding off
- Remove all coatings and sealants
- Fully sand off all old glaze, paints and coatings
- Wood must be dry
Manual sanding
P80
7900 sianet – Rolls
*****
1960 siarexx – Sheets
1960 siarexx – Rolls
****
1902 siacraft – Sheets
***
Machine sanding
P80
7900 sianet – Discs
*****
1960 siarexx – Discs
****
1944 siaone – Discs
***
2
Basic sanding
- Finely sand over the whole surface
- Depending on the type of wood and your requirements, you may need to use a finer grit for sanding
Manual sanding
P120
7900 sianet – Rolls
*****
1960 siarexx – Sheets
1960 siarexx – Rolls
****
1902 siacraft – Sheets
***
Machine sanding
P120
7900 sianet – Discs
*****
1960 siarexx – Discs
****
1944 siaone – Discs
***
3
Primer coat
- Clean the surface thoroughly
- Apply coating according to the manufacturer's instructions
4
Intermediate sanding
- Sand off wood fibres resulting from moisture in the paint
Manual sanding
P240
7900 sianet – Rolls
*****
1960 siarexx – Sheets
1960 siarexx – Rolls
****
1902 siacraft – Sheets
***
Machine sanding
P240
7900 sianet – Discs
*****
1960 siarexx – Discs
****
1944 siaone – Discs
***
5
Second coat
- Clean the surface thoroughly
- Apply coating according to the manufacturer's instructions
- When fully dry, re-apply the coatings and sealants
Entrance doors with a perfect surface finish
Expert tip
Use a siasponge Block for seams and grooves.
7990 siasponge
Expert tip
Use a fleece for quick, soft intermediate sanding of surfaces and edges.
6120 siafleece