Wybrane | Średnica | Schemat otworów | Granulacja / wielkość ziarna | Metal kolorowy | Jednostka opakowania | Nr artykułu | |||
---|---|---|---|---|---|---|---|---|---|
150mm | without holes | 40 | light green | 50 | F 03E 008 KS8 / 8645.2205.0040 | ||||
150mm | 57-hole | 40 | light green | 50 | F 03E 008 KT0 / 2880.1926.0040 | ||||
150mm | 15-hole | 40 | light green | 50 | F 03E 008 KT2 / 8858.5970.0040 | ||||
150mm | 49-hole | 40 | light green | 50 | F 03E 008 KT4 / 5150.9203.0040 | ||||
125mm | without holes | 40 | light green | 50 | F 03E 008 M99 / 8117.6481.0040 | ||||
125mm | 41-hole | 40 | light green | 50 | F 03E 008 MB9 / 8471.5892.0040 | ||||
Średnica | 150mm | |
Granulacja / wielkość ziarna | 40 | |
Jednostka opakowania | 50 | |
F 03E 008 KS8 / 8645.2205.0040 | ||
Średnica | 150mm | |
Grubosć | 10mm | |
Granulacja / wielkość ziarna | 40 | |
Jednostka opakowania | 50 | |
F 03E 008 KT0 / 2880.1926.0040 | ||
Średnica | 150mm | |
Grubosć | 18mm | |
Granulacja / wielkość ziarna | 40 | |
Jednostka opakowania | 50 | |
F 03E 008 KT2 / 8858.5970.0040 | ||
Średnica | 150mm | |
Grubosć | 10mm | |
Granulacja / wielkość ziarna | 40 | |
Jednostka opakowania | 50 | |
F 03E 008 KT4 / 5150.9203.0040 | ||
Średnica | 125mm | |
Granulacja / wielkość ziarna | 40 | |
Jednostka opakowania | 50 | |
F 03E 008 M99 / 8117.6481.0040 | ||
Średnica | 125mm | |
Grubosć | 10mm | |
Granulacja / wielkość ziarna | 40 | |
Jednostka opakowania | 50 | |
F 03E 008 MB9 / 8471.5892.0040 | ||
Boost your efficiency
Efficient stock removal and a very long lifetime in dry sanding applications. The paper thickness, which is tailored to the grit and application, performs impressively on bodyfiller, primer filler and varnish materials. 1550 siapower uses sustainable FSC paper for the abrasive backing.
Technologia
S Performance
- Greater efficiency thanks to application-optimised process steps
- Highest stock removal rate
- Performance-enhancing grit mix with ceramic aluminium oxide in the 40–220 grit range
- Minimal clogging characteristics for lacquer sanding grit range 400-600
- Sustainable FSC paper for the abrasive backing
- Sanding of coatings and impurities
- Sanding out unevenness at the edges of repaired surfaces
- Flatting of bodyfiller and composite materials
- Fine sanding of primer filler
- Keying of old and new lacquers
- Producing a matt finish on old and new lacquers for blending
- Colour
- Primer filler
- Bodyfiller
- Lacquer
- Old lacquer
- Primer coat
- Epoxy primer coat
- Cathodic dip primer coat
- Plastics
- Acrylic glass
- Gelcoat polyester
- Glass-fibre reinforced plastic (GRP)
Typ ziarna:
Mixed grit with ceramic content - 40 – 220
Semi-friable aluminium oxide / blue-fired - 240 – 600
White aluminium oxide - 800
Podłoże:
d-wt paper (FSC-certified) - 40 – 100
c-wt paper (FSC-certified) - 120 – 240
b-wt paper (FSC-certified) - 320 – 800
Powłoka:
Electrostatic
Spoiwo:
Resin over resin
Specjalna powłoka:
Stearate - 240 – 800