1719 sialac

Wide belts (width: from 400 mm)

Best surface quality on soft varnishes

Branches of Industry

Abrasive format

Filter
SelectionWidth mmLength mmHole patternColorPackage unitOrder no.

1350mm2620mmwithout holesblue107244.1304.0240 / F 03E 007 12M

1350mm2620mmwithout holesblue107244.1304.0320 / F 03E 007 12P

1350mm2620mmwithout holesblue107244.1304.0400 / F 03E 007 12R

1350mm2620mmwithout holesblue107244.1304.0500 / F 03E 007 12S

1350mm2620mmwithout holesblue107244.1304.0600 / F 03E 007 12T


Length mm2620mm
Width mm1350mm
Package unit10
7244.1304.0240 / F 03E 007 12M

Length mm2620mm
Width mm1350mm
Package unit10
7244.1304.0320 / F 03E 007 12P

Length mm2620mm
Width mm1350mm
Package unit10
7244.1304.0400 / F 03E 007 12R

Length mm2620mm
Width mm1350mm
Package unit10
7244.1304.0500 / F 03E 007 12S

Length mm2620mm
Width mm1350mm
Package unit10
7244.1304.0600 / F 03E 007 12T

Best surface quality on soft varnishes

Highest surface quality is achieved with 1719 sialac. The additional stearate coating leads to an increased service life with consistent grinding results.

Technology

TopTec

  • Perfect surfaces thanks to TopTec
  • Soft construction and flexible bonding ensure finest-quality surfaces
  • Low clogging thanks to open coating
  • Flexible, adaptable e-wt paper backing
  • Keying of primers
  • Fine sanding primer filler
  • Intermediate sanding of varnishes
  • Water-based varnish
  • PU lacquer
  • NC lacquer
Cut
lowvery high
Lifetime
shortvery long
Finishing
mediumvery good

Grit type:
Silicon carbide

Backings:
e-wt paper

Coating:
Electrostatic open

bonding:
Resin over resin

Special coating:
Stearate